The SEE-ME delayed surface marker buoy is fitted with a zipped pocket system. A clear pocket is fixed to the SMB inner wall. The external pocket cover, made from the same material as the DSMB, has a zipped entry and exit access to allow the user to fit various sized torch/flash lights. When a torch is fitted and switched on the SEE-ME becomes completely luminous and is fully visible through 360 degrees therefore allowing easier visual sighting, especially after nightfall. These particular system has been designed to work in inflatable surface marker buoys enabling search and rescue services to locate the position from a greater distance and would be ideal to locate personnel in emergency situations.

The SEE-ME system may also be used by snorkelers and swimmers and man over board, who possibly may not be seen by oncoming vessels and who would also be more easily detectable if lost at sea. Because the SEE-ME system can be seen over a vast range, it may also be used for any land based activity, such as mountaineering and other adventure sports.

The SEE-ME DSMB has a 20lb (9kgs) lift capability and its dimensions are 1.3m H x 14cm W. It comes in two high-visibility colours; orange and yellow.

The SEE-ME DSMB may be inflated in two different ways:

1. By blowing through the oral tube.
2. The oral tube has a non locking nipple fitting which the user can connect to hold a scuba divers low pressure inflation hose fed from a first stage regulator.

This low volume system is ideal for inflating from shallow depth.

The oral tube has a non-return valve systems to prevent the air from escaping. To avoid over inflation, an overpressure valve is fitted to the DSMB. The same overpressure valve has a pull cord which facilitates deflation of the system. When the SEE-ME buoy is fully inflated it may also be used as an additional flotation device at the surface. Once the SEE-ME buoy has been fully deflated it can be rolled and fastened neatly for storage.