The Custom Divers cylinder content markers are an ideal and safe way to ensure you have marked your cylinders correctly. The white side of the Custom Divers rubber logo may be marked with permanent pen and after use cleaned and reused for a fresh mix. The elasticated cord will allow you to mount your markers in various ways on your cylinders.
Elastic hose retainers with pull-lift tab keeps hoses tidy. These retainers are supplied in pairs and are available for 3, 7 and 10-18ltr cylinder sizes.
Select options
This product has multiple variants. The options may be chosen on the product page
This modular unit may be used for mounting two independent twin cylinders. The bracket hosts a variety of mounting holes and slots for 2" webbing cam bands to mount almost any configuration in any manner. The system is manufactured from marine grade aluminium, anodised in silver and is light in weight making it an ideal travel companion.
Bracket size: 355 x 80 x 25mm
Total weight inc. bolt kit: 1kg
Please note that the cam bands shown in the pictures are for illustration purposes only and must be purchased separately.
These stainless steel knurled M8 fasteners provide an easier fit and allow flush fitting when mounting back-plates to twinning bands, and may be preferred as an alternative to wing nuts or mushroom fittings. There is no more need to search around for your screw driver with these backplate fasteners. Sold separately; remember to order 2 for use with twinning bands.
These quick release couplings are specially designed to give the diver easier mounting of equipment and are available in two different sizes; the larger CD-CDQR4 for mounting cylinders, and the smaller CD-CDQR5 for mounting pony cylinders and accessories.
Select options
This product has multiple variants. The options may be chosen on the product page
This modular unit may be used for mounting rebreather cylinders. The bracket hosts a variety of mounting holes and slots for 2" webbing cam bands to mount almost any configuration in any manner. The system is manufactured from marine grade aluminium, anodised in silver and is light in weight making it an ideal travel companion.
Bracket size: 355 x 80 x 25mm
Total weight inc. bolt kit: 0.40kg
Please note that the cam bands shown in the pictures are for illustration purposes only and must be purchased separately.
This modular unit may be used for pony cylinder mounting, and mounting single cylinders to a backplate. The bracket hosts a variety of mounting holes and slots for 2" webbing cam bands to mount almost any configuration in any manner. The system is manufactured from marine grade aluminium, anodised in silver and is light in weight making it an ideal travel companion.
Bracket size: 355 x 80 x 25mm
Total weight inc. bolt kit: 0.30kg
Please note that the cam bands shown in the pictures are for illustration purposes only and must be purchased separately.
The cylinder lift bar is designed to comfortably lift twinned cylinders on both manifolded and non-manifolded systems. Fitting the lift bar will prevent stress on the manifold itself and o-ring seats. For manifolded tank configurations, the lift bar is positioned just below the manifold and therefore takes the full weight of the cylinders. The fully adjustable system allows fitting to twinned 7ltr to 20ltr tank configurations. All materials are made from marine-grade stainless steel (including fittings). The tank collars are made from marine-grade aluminium and anodised silver.
These valve protectors will protect your first stages from accidental damage in use and during transit to and from the dive site. They additionally provide an acceptable carrying point and hinder untrained people from lifting the set by the isolator bar. Both valve protectors and most fittings are made from stainless steel. The built-in strength in these designs will also allow the tanks to be inverted so that the full weight of the tanks can be rested on the protectors. The unique design of the protector enables them to fit any range of twins from 2x7ltr to 2x20ltr. Fitting is a simple task requiring a spanner and an Allen key.
The single valve protector can be used either for single tank use, or by adding a second protector, for use with twin tank configurations.
Select options
This product has multiple variants. The options may be chosen on the product page
Pro-style valve that easily converts from Yoke to DIN. Whether you dive Yoke or DIN regulators this valve will work for both. Valve has easily removed 200 bar (3,000 psi) DIN insert to convert the valve for use with DIN regulators. Valve has a heavy-duty design with a smooth operating mechanism and multi-ported burst disc plug for added safety.
The stage band comes complete with clip and D-ring. This is mainly used for fixing to tanks and adds an extra D-ring for attaching equipment. Technical and cave divers normally use these bands for hooking up extra cylinders so they can carry them on their person. The standard size band fits comfortably around anything up to a 15 litre tank. All fixtures and fittings including bands are made from stainless steel.
The Edge Heavy Duty Cylinder Carrier fits 17.5cm to 20.3cm (6.9" to 8.0") diameter cylinders. This carrier is equipped with 5.1cm (2") nylon webbing straps with hook & loop fastener and a sturdy padded, side carry handle.
The Edge DIN Valve Cover is made from plastic, and protects your cylinder valve from dust or other particulate ingress, which could clog up the threads or contaminate any oxygen-clean parts.
The HOG DIN Valve Cover is made from delrin, and protects your cylinder valve from dust or other particulate ingress, which could clog up the threads or contaminate any oxygen-clean parts.
This Mesh Cylinder Net protects the cylinder finish on steel cylinder from sizes 8 Litres to 12 Litres and on aluminium cylinders from sizes 50 CuFt to 80 CuFt.
Select options
This product has multiple variants. The options may be chosen on the product page
This pair of Razor Bolt Snaps fits perfectly on your cylinder rigging kit.
Our larger Razor Bolt Snaps are made of rugged, non-corrosive stainless steel.
Easy handling also when diving with gloves, the size of the eye is 45 mm x 45 mm (1.77 inches)
Length 100mm / 3.94 inches. Comes with laser-engraved Razor logo.
